Kärcher SC 4 Iron Kit, Руководство по эксплуатации

Страница: 11 / 18

English 11
In case of water shortage, the indicator
lamp "water shortage" glows red in the wa-
ter reservoir and a signal can be heard.
 Fill the water reservoir up to the "MAX"
marking.
Notes
 Every time there is not enough water in
the steam boiler, the pump automatical-
ly supplies water from the water reser-
voir into the steam boiler. If the water
reservoir is empty, the water pump is
not able to fill the steam boiler and the
steam tapping is blocked.
 The water pump tries to fill the steam
boiler in short intervals. If the filling pro-
cess is successful, the red indicator
lamp goes off.
Use the selector switch for the steam vol-
ume to regulate the discharged steam. The
selector switch has three positions:
 Set selector switch to the required
steam volume.
 While operating the steam switch, al-
ways direct the steam gun at a separate
piece of cloth until the steam is emitted
evenly.
Illustration

Push the steam switch until steam dis-
charge stops. Now, the boiler of the ap-
pliance is unpressurized.
Illustration
 Press the OFF switch to turn off the ap-
pliance.
 Disconnect the mains plug from the
socket.
 Press the cover of the appliance con-
nector to the bottom and disconnect the
steam plug from the appliance connec-
tor.
 Empty the residual water from the water
reservoir.
Illustration
Illustration
 Put the extension pipes into the large
accessory compartments.
 Insert the manual nozzle and detail noz-
zle onto each extension pipe.
 Put the small round brush and nozzles
into the medium accessory compart-
ment.
 Hook the floor nozzle into the parking
position.
 Wrap the steam hose around the exten-
sion pipes and insert the steam pistol
into the floor nozzle.
Refilling Water
Adjusting the Steam Quantity
Maximum steam volume
Reduced steam volume
No steam - child protection
Note:
In this lever position, the steam lever
cannot be used.
Turning Off the Appliance
Storing the Appliance