Kärcher SC 2, Инструкция по эксплуатации

Страница: 13 / 46

English 13
 DANGER
 Never use the appliance in
pools containing water.
 Do not level the steam jet di-
rectly at equipment that con-
tains electrical components,
such as the inside of ovens.
 Check the appliance and the
accessories, especially the
power cord, the safety lock
and the steam hose for prop-
er condition.
Do not use the appliance in
case of damage.

If the power cord is damaged,
please arrange immediately
for the exchange by an au-
thorized customer service or
a skilled electrician.
 Promptly replace a damaged
steam hose. You may only
use a steam hose that is rec-
ommended by the manufac-
turer.
 Never touch the mains plug
and the socket with wet
hands.
 Always disconnect the mains
plug and allow the steam
cleaner to cool down before
performing any maintenance
work.
 Repair works may only be
performed by the authorized
customer service.
 The connection between the
power cord and extension ca-
ble must not lie in water.
몇
WARNING
 The appliance may only be
connected to an electric sup-
ply that has been installed by
an electrician in accordance
with IEC 60364.
 The appliance may only be
connected to alternating cur-
rent. The voltage must corre-
spond with the type plate of
the appliance.
 In wet rooms, e.g. bathrooms,
connect the appliance to
sockets with a series con-
nected RCD adapter.
 Only use splash-proof electri-
cal extension cables with a
minimum cross-section of
3x1 mm²
 Replace couplings at the
power cord or extension ca-
ble only with couplings that
have the same protection
against splashing water and
the same mechanical
strength.
 Be very careful while cleaning
tiled walls with sockets.
몇
CAUTION
 Make sure that the power
cord or extension cable is not
damaged by running over,
pinching, dragging or the like.
Protect the power cords from
heat, oil, and sharp edges.

DANGER
 The user must use the appli-
ance as intended. The person
must consider the local condi-
tions and must pay attention
Electric components
Safe handling