Kärcher MIC 26C, Оригинальная инструкция по эксплуатации

Страница: 71 / 298

-
34

CAUTION
Risk of damage!
 The vehicle must not be towed away. Only slowly push
or pull the device (walking speed)
 DANGER
The vehicle is not approved for crane loading.
 Fasten the towing rope to the towing eye in the front or
the rear.
 Slowly drag the vehicle onto the transport vehicle.
11 Troubleshooting
11.1 Faults with display
Display Cause Remedy By whom
Warning lamp for
motor tempera-
ture lights up Engine is overheated Set the engine speed to idle. Operator
Check the level of cooling liquid in the engine.
If the warning lamp does not turn off within 5
minutes, shut off the engine and contact Cus-
tomer Service.
Warning lamp for
hydraulic oil tem-
perature Hydraulic oil overheated Temperature too high: Let the motor idle until
the warning light is off.
Switch off the working hydraulic. Operator
Warning lamp for
battery lights up Battery is not being charged Call Customer Service. Operator
11.2 Faults without display
Fault Remedy
Appliance cannot be started Charging or replacing battery
Press the brake pedal.
Fill in fuel, deaerate the fuel system
Clean or replace fuel filter
Check fuel pipes, connections and joints and maintain them if required
Inform Kärcher Customer Service.
Engine is running erratically Clean or replace air filter
Check fuel pipes, connections and joints and maintain them if required
Inform Kärcher Customer Service.
Engine is running but machine is only moving
slowly or is not moving at all Release parking brake
Check level of hydraulic fuel
Inform Kärcher Customer Service.
Operation problems with hydraulic movement
parts Inform Kärcher Customer Service.
11.3 Towing
71 EN