Kärcher MIC 26C, Оригинальная инструкция по эксплуатации

Страница: 58 / 298

-
21
 Position the vehicle under the chassis mounted spread-
er that is standing on the supports.
 Lower the chassis mounted spreader into the guides of
the rear structure.
 When attaching the chassis mounted spreader to the
vehicle for the first time, the left and right front guide
must be adjusted.
1 Screw (one visible, two covered)
2 Guidance

Adjust guide: Loosen 3 screws at the front side by ap-
prox. 1 rotation (left and right).

Slide the chassis mounted spreader all the way to the
front until the safety bolts in the back can be locked.

Tighten the visible screw.

Unlock the safety bolts and slide the chassis mounted
spreader slightly to the back, tighten the remaining
screws.

Slide the chassis mounted spreader all the way to the
front and lock it with safety bolts in the back.
1 Hydraulic couplings main PTO
2 Electric connectors
 Connect the hydraulic hoses and electrical plug with
the respective couplings.
 Switch on the PTO to switch on the control
 Plug the plug of the lamp into the socket at the hind car-
riage.
 Switch on the working light with the switch.
1 Safety pin
2 Counterweight
 Unlock the safety bolt by turning it and pull it out toward
the side.
 Slide the counter weight into the square pipes of the
machine frame.
 Slide in the safety bolt and lock it by turning it.
1 Safety pin
2 Counterweight
3 Towing hitch
 Unlock the safety bolt by turning it and pull it out toward
the side.
 Slide the counter weight with the attachment hitch into
the square pipes of the appliance frame.
 Slide in the safety bolt and lock it by turning it.
 The permissible drawbar and drawing loads of the machine
are indicated in the Chapter "Technical Specifications".
8.8.2 Operations
8.8.3 Connecting the work light
8.9 Balance weight without
attachment hitch
8.10 Balance weight with
attachment hitch
8.10.1 Towing hitch
1 2
1
1
2
1
3
58 EN