Kärcher IV 100/40 M B1, Руководство пользователя

Страница: 18 / 320

– 5
tion containers, may only be performed
by specialists who wear the appropriate
protective equipment.
„ The vacuuming material container must
be emptied, even after every use.
„ It is statutorily necessary to use a dust
collection bag (see "Control Elements"
for order number).
„ Do not use the appliance without the
complete filtering system.
„ You are not allowed to use an extension
cable.
„
During proper/ improper use, the parts
(such as exhaust opening) of the indus-
trial vacuum cleaner can tolerate a
maximum of 116°C.
몇
Warning
Only use Category 1 accessories approved
by the manufacturer for use. The use of
other accessories can give rise to risk of ex-
plosion
„ Check the status of the ground strap, its
fasteners and its entire functioning be-
fore start-up and at regular intervals.
„ Vacuum only using all the filter ele-
ments; otherwise, the suction motor can
get damaged and this can be hazard-
ous to health on account of increased
release of fine dust particles!
„ According to the applicable regulations,
industrial vacuum cleaners (IS) of cate-
gory 1 are not suited for use on work
machines.
„ Appliances of category 1 are not suita-
ble for sucking in dusts or fluids with
high risk of explosion and mixtures of
combustible dust with fluids.
„ The applicable safety regulations for
the materials to be treated need to be
followed.
„ From a safety point of view, industrial
vacuum cleaners with protection
against dust explosions are not suitable
for sucking in substances that are ex-
plosive in nature, fluids and mixtures of
combustible dust with fluids according
to section 1 of the Explosives Act.
In case of emergency (while sucking in
combustible materials, when there is a
short-circuit or some other electrical de-
fect), switch off the appliance and remove
the plug from the socket.
Note
Additional regulations can be applicable to
dusts with an ignition capacity below 1mJ
.
Î Bring the appliance to working position
- secure it, if required, with parking
brakes.
Î Insert the suction hose into the suction
hose connection.
Î Attach the desired accessoried to the
suction hose.
Î Ensure that the vacuum material con-
tainer has been inserted properly.
몇
Warning
The maximum tolerable mains impedance
at the electrical contact point (see Techni-
cal Data) must not be exceeded.
Î Turn on/off switch to "1".
Î For IV 100/75 M B1 press 'Switch-on
appliance" button.
몇
Warning
Avoid rolling up or bending the hose while
using the vacuum cleaner.
The machine is equipped with a suction
power monitor. If the air speed in the suc-
tion hose falls below 20 m/s, the manome-
ter will display the following pressure
reading:
Perform the following activities to regain the
prescribed air speed of more than 20 m/s:
Î Switch off IV 100/40 M B1 or IV 100/55
M B1 at the ON/OFF button.
In Emergency
Start up
Operation
Monitoring the suction performance
NW 50 NW 60
IV 100/40 M B1 13,0 kPa 12,0 kPa
IV 100/55 M B1 19,5 kPa 15,5 kPa
IV 100/75 M B1 25,0 kPa 19,5 kPa
18 EN