Kärcher HDR 777, Руководство пользователя

Страница: 15 / 96

-
4
Î Turn the main switch to position "0"
The operating type (recycling or inlet into
the drainage system) must be set by the
Customer Service mechanic at the time of
start-up.
The plant can be operated in 5 versions:
1 Operate with connection to the drainage
system
2 Recycling operations with high-pressure
cleaner
3 Recycling operations with high-pressure
cleaner and inlet into the drainage system
4 Recycling operations with buffer tank at the
end
5 Recycling operations with buffer tank at the
end and inlet into the drainage system
All 5 operation modes need different instal-
lations, see "Plant installation".
Î Turn the main switch to position "1"
Î Turn the main switch to position "0"
Î Water must be drained out of the sys-
tem by opening the drain cock if the
plant is to remain idle for a longer time
or if there are frost conditions.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport it.
Î When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Only a well-maintained plant is safe. En-
sure that you carry out regular mainte-
nance tasks according to the following
maintenance plan.

Danger
– Risk of accident due to improper main-
tenance! Service and repairs may only
be carried out by authorised persons or
Kärcher Customer Service.
– Risk of injury! Never intervene in the re-
action tank when the plant has been
switched on or the stirrer is on.

Danger
Risk of electric shock.
– Before starting any work on the plant,
switch off the main switch and pull out
the plug.
– Switch off both the devices in case of
recycling operations with high-pressure
cleaner.
– The switching cabinet may only be
opened when the plant has been
switched off and separated from the
power supply.
Use exclusively original parts of the manu-
facturer or those parts recommended by
him. Observe all instructions on safety and
use which are accompanying these parts.
This concerns:
– replacement and wear parts
– Accessory parts
– Fuel
Operation
Switch-off in case of emergency
Operation
Shutting down
Storage
Transport
Technical specifications
Nominal voltage V 230/1~
Frequency Hz 50
Power kW 1,2
Depth mm 630
Width mm 1300
Height mm 1300
Weight, empty kg 165
Weight, full kg 485
Sound pressure level L
pA
dB(A) < 60
Uncertainty K
pA
dB(A) 1
Max. throughput; liquid
splitting agent l/h 800
Max. throughput; splitting
powder l/h 600
Contents of storage tank l 250
Consumption of liquid
splitting agent ml/m
3
ap-
prox.
225
Consumption of splitting
powder kg/m
3
ap-
prox. 1
Consumption of sterilisa-
tion agent ml/m
3
ap-
prox.
100
Maintenance and care
15 EN