Kärcher HD 3.5/30-4S Ea, Руководство по эксплуатации

Страница: 6 / 34

English
6
„
The Trigger Gun Safety Lock
PREVENTS the trigger from
accidentally being engaged. This
safety feature DOES NOT lock
trigger in the ON position.
„
Do not use extension cord for this
unit.
Warning!
To reduce the risk of
electrocution, keep all connections dry
and off the ground. Do not touch plug
with wet hands.
Grounding Instructions
This product must be grounded. If it
should malfunction or breakdown,
grounding provides a path of least
resistance for electric current to reduce
the risk of electric shock. This product
is equipped with a cord having an
equipment-grounding conductor and a
grounding plug. The plug must be
plugged into an appropriate outlet that
is properly installed and grounded in
accordance with all local codes and
ordinances.
Danger!
Improper connection of the
equipment-grounding conductor can
result in a risk of electrocution. Check
with a qualified electrician or service
personnel if you are in doubt as to
whether the outlet is properly
grounded. Do not modify the plug
provided with the product - if it will not
fit the outlet, have a proper outlet
installed by a qualified electrician. Do
not use any type of adapter with this
product.
Ground Fault Circuit Interrupter
(GFCI) Protection
This product is supplied with a Ground
Fault Circuit Interrupter (GFCI) built
into the power cord plug. This device
provides additional protection from the
risk of electric shock. If power is
interrupted in the line, the GFCI will
automatically re-close the circuit to the
load after power is restored.
Depending on the GFCI model, it may
be necessary to manually operate the
reset button to restore power to the
GFCI load circuit. If replacement of the
plug or cord is needed use identical
replacement parts.
WATER SUPPLY
Caution!
When connecting the water inlet to
the water supply mains, local regulations
of your water company must be
observed. In some areas the unit must
not be connected directly to the public
drinking water supply. This is to ensure
that there is no feedback of chemicals
into the water supply. Direct connection
via a receiver tank or backflow preventer
for example, is permitted.
Dirt in the feed water will damage the
unit. To avoid this risk, we recommend
fitting a water filter.
„
Never use the pressure washer to
draw in water contaminated with
solvents, e.g. paint thinners,
gasoline, oil, etc.
„
Always prevent debris from being
drawn into the unit by using a clean
water source.
SAVE THESE
INSTRUCTIONS!!
!
!