Kärcher FR 30 Me, Руководство пользователя

Страница: 10 / 64

Operating Instructions FR 30 Me E nglish
10
Nozzle kit assembly
Fig. 1
Note:
Observe sequence!
¾
Insert O-ring in groove of
rotation arm
¾
Plug-on nozzle
¾
Screw nozzle not too tight with
union nut
Fig. 2
Warning!
The discharge jet must be aligned
parallel to the rotation arm
¾
Align spanner-grip surface of
the nozzle (width across
flats 10) parallel to rotation arm
¾
Tighten union nut (width across
flats 22) with a spanner
Cleaning floors
Fig. 3
¾
Connect steel pipe of high
pressure cleaner to the FR 30
and tighten it with a spanner
(width A/F 24)
Cleaning walls
Preparation for
siphoning-off water
Note:
A suction device or a drain hose
can be connected with the
provided suction drain fitting
Removing the wheel set
(as required)
Fig. 4
¾
Do not remove swivel casters
from bracket
¾
Unscrew bracket from unit
¾
Refasten screws to the unit
(stabilisation of the bristles)
Installing the suction
fitting
Fig. 5
¾
Pull off cover
Fig. 6
¾
Fasten the suction fitting with
the supplied screws and nuts
High-pressure cleaner
connection
Fig. 7
¾
Disconnect angle joint from unit
(width A/F 27)
¾
Screw on handgun directly
¾
Tighten union nut with a
spanner
Siphoning-off water
options
Hose connection
Fig. 8
¾
Fasten hose with hose clamp to
suction fitting
Fig. 9
¾
Hold the unit at the centre
support
¾
Ensure that the hose hangs
down vertically
Siphon connection
Fig. 10
¾
The cover must be removed in
order to prevent a vacuum
developing
Fig. 11
¾
Connect hose of the siphon to
the suction fitting
Note
See accessory page for coupling
sleeves
Fig. 12
¾
Hold the unit at the centre
support
¾
Ensure that the hose hangs
down vertically
Care
—
protect from frost
—
Lubricate swivel casters
regularly
—
Ensure bristles are not
deformed during storage