Kärcher BDP 55/1900 W Bp, Руководство пользователя

Страница: 24 / 242

24
English
Î
Adjust the contact pressure at the turning
handle.
몇
Warning
Floors can get damaged on account of too
high contact pressure. Carry out the initial
polishing attempts with less contact pres-
sure. Increase the contact pressure as per
requirements until the desired polishing re-
sult is achieved.
If the operational break exceeds 30 minutes,
the machine goes into stand-by mode. To
restart the machine, turn the key switch
briefly to "0" and then turn it again to "1".
Î
Release driving lever.
Î
Raise the polishing head.
Î
Apply parking brake (optional). Press
the pedal downwards and move it to the
right to lock it.
Î
Set the key switch at the operator con-
sole to "0" and remove the key.
Î
Charge battery, if required.
몇
Warning
Please observe the local provisions regard-
ing the wastewater treatment.
Î
Take the water discharge hose from the
support and lower above a suited collec-
tion device.
Î
Let off dirt water by opening the dosage
device at the discharge hose.
Î
Separate the suction hose in the dirt wa-
ter reservoir at the coupling.
Î
Remove the suction hose and the elbow
from the reservoir.
Î
Remove the air guide plate from the dirt
water reservoir.
Î
Rinse the dirt water tank with clear water.
Î
Reinsert the air guide plate and connect
the suction hose.
Stand-by
Shutting Down the Appliance
Drain off dirt water