8
English
7.
Only for BD 80/100 and BR 85/100:
Press the brake
lever down.
1
Brake lever
Note
For BD 70/75 and BR 75/75, there is no brake. Releasing
the brake is not necessary with this device.
8. Pull the device backwards off the pallet.
9.
Only for BD 80/100 and BR 85/100:
Press the brake
lever up.
Installing the suction bar
1. Insert the suction bar in the suction bar mount.
2. Tighten the wing nuts.
3. Fit the suction hose.
Batteries
Recommended batteries
ATTENTION
Risk of damage
Using other batteries may damage the device.
Only use the recommended batteries.
Installing and connecting batteries
몇
CAUTION
Removing and installing the batteries
Unstable machine position
Ensure that the machine is positioned stably when remov-
ing and installing the batteries.
ATTENTION
Incorrect connection polarity
Destruction of the control electronics
Take care to ensure the correct polarity when connecting
the batteries.
ATTENTION
Deep discharge
Risk of damage
Charge the batteries before starting the device.
1. Drain the waste water.
2. Pivot the waste water tank upwards.
3. Disconnect the battery plug.
4. Place the battery in the device as shown.
BD 80/100
:
1
Battery
2
Battery pole
3
Spacer 150x150x65
4
Circular connector
5
Spacer 90x185x335 (2 pieces on top of each other)
BD 70/75 80 Ah:
1
Battery
2
Battery pole
3
Circular connector
4
Spacer 150x150x65
5
Additional weight, 6 plates
6
Additional weight, 14 plates
Device
Battery
BD 70/75 W Classic Bp Pack 80
Ah Li
1 x 6.654-454.0
BD 70/75 W Classic Bp Pack 160
Ah Li
2 x 6.654-454.0
BD 80/100 W Classic Bp Pack 160
Ah Li
2 x 6.654-454.0
1
Содержание BD 70/75 W Classic Bp Pack 80 Ah Li
Страница 2: ......
Страница 47: ...Espa ol 47...