Kärcher BD 70/75 W Classic Bp Pack 80 Ah Li, Руководство пользователя

Страница: 10 / 48

10 English
6. After the charging process is complete:
a Unplug the mains plug of the charger.
b Disconnect the battery connector from the charger.
c Connect the device-side battery connector to the bat-
tery-side battery connector.
Operation
ATTENTION
Risks during operation
Danger of injury
Release the safety switch in the case of danger.
Filling with operating materials
Filling fresh water
1. Open the fresh water tank cap.
2. Fill fresh water (maximal 122 °F (50 °C)) to the lower
edge of the filling nozzle.
Note: The fresh water hose can be clamped with the
hose holder during filling.
3. Close the fresh water tank lock.
Notes on detergents
몇
WARNING
Risk of damage to the device!
If unsuitable detergents are used, the device may get dam-
aged.
Use only recommended detergents. The operator carries
all increased risks relating to operational safety and in-
creased risk of accidents if using other detergents.
Use only detergents free of solvents, salt and hydrofluoric
acid.
Adhere to the safety instructions stated on the detergent
packaging.
Note
Do not use heavily foaming detergent.
Recommended detergents
Detergent
1. Fill the detergent into the fresh water tank.
Note: The cap for the fresh water tank filling hole can be
used for measuring the correct quantity of detergent. It
has a measuring scale marked on the inner side.
Adjusting the water volume
1. Adjust the water volume via the regulating knob to suit
the degree of soiling of the floor covering.
Note
Perform initial cleaning tests with a low water volume. In-
crease the water volume step by step until achieving the
desired cleaning result.
Note
The cleaning head continues operating without a liquid
supply if the fresh water tank is empty.
Adjusting the suction bar
Adjusting the inclination
The inclination must be adjusted so that the suction lips of
the suction bar make even contact with the floor over the
entire length of the suction bar.
1. Loosen the screw.
1
Screw
2. Adjust the inclination of the suction bar.
3. Tighten the screw.
Adjusting the height
The height adjustment affects the bending of the suction
lips on contact with the floor.
1. Push the device a small distance forwards.
2. Compare the bending of the suction lips with the figure
below.
´
1
Spacer roller with holder
2
Washer
3
Screw
3. Unscrew the screw.
Application Detergent
Floor maintenance cleaner extra low
foaming with EU Ecolabel APPROX. 50 C
Highly wetting universal cleaner RM 756
Intensive alcohol cleaner for floors and
surfaces. Well-suited for hard rock
such as granite RM 755
Fine stone cleaner, surfactant-free RM 753
Universal decoater, suitable for linole-
um RM 754
Acidic vending machine basic cleaner.
Suitable for sanitary areas and con-
struction cleaning RM 751
Industrial maintenance cleaner RM 69
Industrial basic cleaner and alkaline
decoater RM 752
Surface disinfectant cleaner RM 732
1
10 mm
1 2
3