Kärcher BD 45/40, Руководство по обслуживанию

Страница: 91 / 127

English 5.906-269.0 Rev. 00 (03/11)
91
1 Fastening screw
2 Scraper roller
3 Vacuum lip mounting
4 Vacuum lip
5 Vacuum bar
Clean the vacuum lips on the suction bar and check
for wear and damage.
If necessary, turn or replace the vacuum lips.

Pull the fastening screw, scraper roller vacuum lip
mount off the suction bar on both sides.

Pull the vacuum lips out of the side of the guide
grooves, and turn or replace them.
Note
Both suction lips can be reversed by 180°.
A scraper roller must be replaced if it is damaged or
worn out
1 Fastening screw
2 Scraper roller
3 Vacuum lip mounting
4 Vacuum lip
5 Vacuum bar

Loosen the fastening screw.

Remove the deflector roller upward.
Insert the new deflection rollers in reverse sequence.
9.5 Vacuum bar
9.5.1 Clean/replace the vacuum lips 9.5.2 Replacing the deflector roller