Kärcher BD 45/40, Руководство по обслуживанию

Страница: 32 / 127

32
English 5.906-269.0 Rev. 00 (03/11)
Note
Model 1:
Reset of the red battery monitoring LED with a charge
status of the battery of 25.8 V. You cannot continue
until you do this.
Model 2:
This does not require a reset of the battery monitoring
LED.
When the battery is first connected to an appliance,
charge it completely to reset a possible total dis-
charge that may have been saved in the control.
6.2.5 Indicator lamp - battery monitoring
Discharge Operating mode, battery capacity in % Charging mode, charge status
in %
Glows green continuously Battery charged, 40% - 100%, 23.0 V ± 0.2 V 80% - 100%, charge protection
active, discharge level 1
Glows yellow continuously Remaining capacity 20% - 40%, 22.3 V ± 0.2
V
60% - 80%, discharge level 2
Slowly* blinks yellow - 40% - 60%
Slowly * blinks yellow/red - 20% - 40%
Slowly* blinks red Remaining capacity 0% - 20%, 21.0 V ± 0.2 V
If the indicator lamp "fault" also blinks slowly,
there is a malfunction with the brush. 0% - 20%, discharge level 3
Glows red continuously Battery depleted (total discharge protection
21.0 V ± 0.2 V)
The suction turbine is switched off after a
trailing time of 10 seconds. Battery depleted, total discharge
protection
Charge
Blinks red rapidly** If the indicator lamp for "fault" blinks rapidly,
the battery is defective. Refresh charge
Blinks yellow rapidly** - Rapid charge, main charge
Blinks green rapidly** - The charge cannot be main-
tained.
Slowly* blinks green - The charge maintenance is per-
formed.
* Blink frequency slow = 1x per second
** Blinking frequency
rapid = 4x per second