Kärcher BD 45/40, Руководство по обслуживанию

Страница: 7 / 127

English 5.906-269.0 Rev. 00 (03/11)
7
–
No water pump, the water flows to the cleaning
head via gravity.
–
Water volume regulation via ball tap.
–
Automatic water stop when brushes stop by sole-
noid valve water inlet.
–
Fill level indicator of fresh water reservoir.
–
Tank-in-Tank system (2-piece).
–
Fresh water reservoir (40 l).
–
Waste water reservoir (40 l).
–
Suction turbine
–
Mechanical swimmer
–
Suction bar - straight and curved model.
–
The suction bar is lowered/raised manually.
–
Cleaning head with quick brush change system.
–
2 brush rollers, working width 550 mm (BR 55/40)
or 450 mm (BR 45/40 mm).
–
Brush drive system with toothed belt.
The brush rotation direction of vehicles without drives
is even, this will create a propulsion.
The brush rotation direction is in opposite directions
for vehicles with drives.
–
1 disc brush with rapid exchange system.
–
Brush drive system with toothed belt.
–
Control handle
–
6-level programme selector switch (mechanical
decoding switch)
–
Indicator lamp - battery monitoring
–
Indicator lamp - fault
–
Clean speed setting, 5 setting levels (20% -
100%), factory setting 60%
–
Switch bow with microswitch
–
6-level programme selector switch (mechanical
decoding switch)
–
Built-in charger (Bp Pack only)
–
Batteries 100 Ah, maintenance-free (Bp Pack on-
ly)
–
Charger 230 V, 15 A (± 10%), IUla characteristic
(Bp Pack only)
–
Standby operation, switches off after 30 minutes.
–
BR model:
FACT speed setting. 3 adjustment steps (Power/
Whisper/Fine), factory setting power.
4.3 Water system
4.4 Vacuuming operations
4.5 Cleaning operations
4.5.1 Brushing rollers
4.5.2 Disc brush
4.6 Electrical system
4.6.1 Ep model
4.6.2 Bp model