Kärcher 4.115-000.0, Руководство пользователя

Страница: 9 / 104

– 3
 Unscrew the nozzle from the spray pipe
of the high pressure cleaner.
 Insert nozzle moulding in the spray noz-
zle of the nozzle package.
 Put spray nozzle on the spray lance of
the high-pressure cleaner.
 Insert nozzle holder of the wet jet unit in
the spray lance.
 Screw the nozzle holder tightly onto the
spray lance.
 Loosen the clamping screw of the noz-
zle holder.
 Rotate the nozzle holder until the spraying
agent hose is pointing toward the top.
 Tighten the clamping screw of the noz-
zle holder.
ATTENTION
Increased risk of damage when using a bo-
ron carbide spray nozzle. Boron carbine
spray nozzles are sensitive to impact. Do
not use a hammer for the installation or re-
moval. Do not overtighten the clamping
screw of the spray nozzle.
 Insert the spray nozzle into the nozzle
holder.
 Tighten the spray nozzle clamping screw.
 Fasten the spraying agent hose to the
spray lance using clamps. Do not
stretch or kink the hose.
 Insert the suction pipe into the spraying
agent container or the spraying agent
bag.
Note:
Keep the spraying agent dry. Wet spraying
agent will cause malfunctions.
 Start up the high pressure cleaner.
 Press the lever on the hand spray gun.
 Perform the spraying task.
Note:
Dispose of the used spraying agent accord-
ing to the local provisions.
The volume of the suctioned spraying
agent is adjusted on the air bore and the
spraying agent bore.
 Open the spraying agent bore.
 Close the air bore.
 Close the spraying agent bore.
 Open the air bore.
몇
WARNING
Risk of injury. First pull out the plug from the
mains before carrying out any tasks on the
high pressure cleaner.
 Rotate the spray nozzle by 90° at regu-
lar intervals to achieve an even wear.
 Replace the spray nozzle.
55 2.112-024.0
60 2.112-025.0
65 2.112-026.0
70 2.112-027.0
75 2.112-028.0
80 2.112-029.0
100 2.112-030.0
Born carbide nozzles (low wear)
up to 1,000 l/h 6.415-084.0
from 1,000 l/h 6.415-083.0
Start up
Operations
Adjust amount of spray agent (only
for 4.115-000.0)
Increase the spraying agent volume.
Decrease spraying agent volume
Standard setting
Spraying
agent grit Spraying
agent bore Air bore
8 3/4 open 1/2 open
9 1/2 open 3/4...1 open
Care and maintenance
Accessories
Order No.
Spraying agent, fine,
0.2...0.8 mm, 25 kg 6.295-564.0
Spraying agent, coarse,
0.25..0.1.4 mm 6.295-565.0
Specifications
Spraying agent use kg/h 18...220
9 EN