Kapture KPT-942, Руководство пользователя

Страница: 7 / 36

7
Rear View Camera
1. Wide Angle Lens
2. Rear Camera Swivel Base
3. Micro USB Cable Input
4. Rear Camera Vertical Rotator
5. Rear Camera Horizontal Rotator
2. Getting Started
2.1 Inserting Memory Card
With the screen view towards you, insert memory card with the pins view toward you as illustrated. Push the memory card in. Slide the
Power button into ON/LOCK position which will lock the micro SD card in position.
Note:
1. Do not remove or insert the memory card when the device is turned on. This may
damage the memory card.
2. Please use a Class 6 or higher rated Micro SD card, 16GB or above (up to 32GB).
3. Please format the Micro SD card before the initial use.
Removing Memory Card
Ensuring the power switch is in the off position (refer to ‘power off’ image on page 10) simply pull the micro SD card from the slot.
2.2 Installing in Vehicles
2.2.1 Mounting the Car Dash Cam to the Windscreen
1. Push the bracket into bracket slot on top
of device, and slide the mount from right
to left until a click sound is heard.
3. Hold the base firmly on the windscreen
and push the locking switch up to
mount the car holder to the windscreen.
Make sure the base is securely locked
in place.
2
2. With the suction-cup lock switch in the
down orientation, position the suction-cup
on the windshield.
1
Note:
For optimum operation it is advised that the KPT-942 is installed near, or behind your vehicles rear view mirror.
2.2.2 Removing the Car Dash Cam from the Windscreen
1. Release the locking switch as shown in
the picture below.
2. Pull the plastic tab on the suction cup to
loosen the mount from the windscreen.