Kapture KPT-942, Руководство пользователя

Страница: 15 / 36

15
4.
Press to exit the menu and return to the recording screen.
5. After enabling LDWS , the screen will display alignment guidelines
please adjust the position of the Car Dash Cam so that the horizontal
guideline and the horizon line overlap, and the diagonal lines are aligned
with the lane markings on screen. Make sure that the guide lines are not
obscured by any part of your vehicle (e.g. hood) during installation, as this
may affect the accuracy of
LDWS .
6. Once your car’s location is determined by GPS, this product produces voice
and screen message alerts when you change lanes at speeds over 50 km/h.
Note:
1. LDWS is only active when satellite positioning is available. Make sure GPS settings on your Car Dash Cam is activated
2. The Driving Safety functions such as LDWS , FCWS , FCMD , Headlight Warning , Speed Cam Alert , Speed Limit Alert , and
Driver Fatigue Alert will be disabled if the product isnt powered by the vehicles’ 12V power supply.
3. The
LDWS
function may give false alarms in poor conditions, including rainy or cloudy weather, at night, or in poor lighting
environments and can be trigged by external factors while not changing lanes. Drivers are advised to exercise discretion based on
actual road conditions.
3.2.2 Forward Collision Warning
System (FCWS)
Once your car’s location is
determined by GPS and the
FCWS function is enabled, this
product produces voice and
screen message alerts when you
drive at speeds over 60 km/h and
are less than 20m away from the
car in front of you.
To set the FCWS , please follow
the instructions below:
1. Press (shown on screen
as ) to enter the Main
Menu .
2. Use the
and
buttons to navigate to Forward
Collision Warning System
and press the button to enter the menu.
3.
Use the
and
buttons to change the setting ON or OFF and press to confirm.
4. Press to exit the menu and return to the recording screen.