15
GB
TECHNICAL DATA
FIRST USE
Note: make sure all components have been removed from the packaging before throwing away
Warning! To prevent injury to the user, do not use the machine if any parts inside of the packaging are missing. Ask your dealer for
the missing parts.
Warning! Some metallic parts may have sharp edges; take care when moving the machine and its packaging
Content of carton
KDE-1200 Mixer
1 pc
Paddle
1 pc
Wrenches 22mm
2 pcs
User manual
1 pc
The mixer si sold aready mounted and the user only needs to add the paddle ( see followings chapters)
APPLICATIONS
The machine is designed for stirring powder-type building materials such as mortar, plaster, cement, and solvent-free paints,
varnish and similar substances.
The user alone is responsible for any liabilities caused by usage other than intended.
PRE-START INSPECTIONS
The following Pre-start-up inspection must be performed before the start of each work session or after every four hours of use,
whichever is first. Please refer to the service section for detailed guidance. If any fault is discovered, the Promix must not be used
until the fault is rectified.
1. Thoroughly inspect the mixer for signs of damage. Check components are present and secure. Pay special attention to the
Mixing Paddle, and ensure it is correctly attached to the handle.
2. Check electricity cables for signs of exposed wires. Fix any exposed areas before operating
Power
1200W
Weight
4,5kg
Weight with paddle
6kg
Height with paddle
875mm
No load speed (1)
180-380RPM
No load speed (2)
300-650RPM
Tool size
M14
Paddler diameter
120mm
