SkinGuard® Series
Owner’s Manual
PN 400901 Rev. C
ECO 18-0281
Page 28
To deflate the Expandable Mattress System (XMS) or Expandable Length Mattress System (EL), set the valve
selector to position #4 on both expansion regulator valves and pull the hose (V) from the control unit flange
connector.
When expanding or contracting the Expandable Mattress (XMS) and Expandable Length Mattress System (EL),
make sure to tighten or loosen the straps accordingly to the mattress width.
EXPANSION AIR CELLS
•
To increase the length of the mattress, obtain an air cell expansion kit and connect the male connector to
the female connector on the exterior wall at the end of the mattress (see picture above).
•
Use the straps and snaps to secure the expansion top sheet to the mattress.
CPR FUNCTION
•
To deflate the mattress / overlay pad or for a CPR procedure, disconnect the mattress hose from the
control unit by pulling the mattress hose connector straight out from the control unit magnetic connector.
