KAP Medical K-1 Series Скачать руководство пользователя страница 10

                                                                                                          K-1 & K-2 Series Owner’s Manual  

 

 

Page 9 

BED RAIL ENTRAPMENT RISK NOTIFICATION 

 

 

NOTICE TO PATIENT, PATIENT’S FAMILY AND/OR PRIMARY DAY-TO-DAY CAREGIVER 

 

DO NOT use this product without first completely reading and understanding this Bed Rail Entrapment Risk Notification 
and any additional instructional material such as owner’s manual, instruction sheets and on-product warnings supplied with 
this product.  If you are unable to fully understand this Bed Rail Entrapment Risk Notification, the on-product warnings or 
any additional instructional materials, contact the patient’s health care provider and/or your equipment provider before 
using this equipment.  Failure to understand and comply with the information contained in this Bed Rail Entrapment Risk 
Notification can result in serious injury or death. 

Entrapment within the bed rail        Entrapment under the bed rail       Entrapment between the      Entrapment between the  
                                                                                                                         bed rail and mattress            head or foot board and the 

 

                                                                                                                                  

end of the mattress

 

 

 
 
 
 
 
 

 Entrapment under the bed rail at the ends        Entrapment between split bed rails            Entrapment between the end of  
of the bed rail 

 

 

 

                                                                                 the rail and the side edge of the  

 

 

 

 

 

 

 

 

 

 

 

          headboard or foot board 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 

 
 

 

RISK OF ENTRAPMENT 

 

Bed Rail Entrapment is a known risk in the use of bed’s equipped with bed rails. 

 

Every patient is unique.  Only the patient’s medical care provider is familiar with the patient’s unique medical condition and 
needs.  Only the patient’s medical care provider and/or the dealer from whom you obtained this equipment, upon proper 
assessment of the patient’s medical condition and needs, can evaluate whether this equipment is appropriate for use by any 
particular patient and assist the patient, the patient’s family and/or the patient’s primary day-to-day caregiver in assessing 
the Risk of Entrapment. 

 

Proper patient assessment, equipment selection, frequent patient monitoring, and compliance with instructions, warnings 
and this Bed Rail Entrapment Risk Notification is essential to reduce the risk of entrapment. 

Accessories have been developed in the industry to reduce the openings in existing bed systems that could cause 
entrapment.  Any modification through the use of accessories must be used in conjunction with proper patient assessment 
prior to intervention.  For a full discussion on this topic, see the Hospital Bed Safety Workgroup’s “A Guide for Modifying 
Bed Systems and Using Accessories to Reduce Risk of Entrapment” found at 

Conditions such as restlessness, mental deterioration and dementia or seizure disorders (uncontrolled body movement), 
sleeping problems, and incontinence can significantly impact a patient’s risk of entrapment, Pediatric patients or patients 
with small body size may also have an increased risk of entrapment. 

 

 

Содержание K-1 Series




































Отзывы: