Kantronics KPC-9612, Руководство по началу работы и справочник

Страница: 22 / 81

KPC-9612 Version 5.2 July 19, 1994
22
  
CONOk ON|OFF {ON/ON}
When ON, connect requests from other TNCs will automatically be acknowledged. When OFF, a
connect request from a distant station will be answered with a <DM> packet, causing that station
to get a busy message from you. When this occurs you will see a "connect request" message on
your terminal.
See also: conmode, connect, intface, maxusers, monitor, nomode, users
  
CONVers {immediate command}
This command will place your KPC-9612 in the Convers Mode on the current I/0 stream.
See also: k, command, stat
  
CPactime ON|OFF {OFF}
When OFF and in the Convers Mode, packets are transmitted when the SENDPAC character is en-
tered, or when PACLEN is exceeded. When ON, packets are sent at periodic intervals determined
by PACTIME.
See also: convers, cr, paclen, pactime, sendpac, trans
  
CR ON|OFF {ON}
When ON, the SENDPAC character (normally carriage return) is appended to packets sent in Conv-
ers Mode. When OFF, the SENDPAC character is not transmitted as part of the packet.
See also: lfadd, sendpac
  
CRSup ON|OFF {OFF}
When ON, every other carriage return will be suppressed when two or more carriage returns are
received with no data between them. When OFF, no carriage return suppression occurs.
See also: autolf, lfsup
  
CStamp ON|OFF {OFF}
When ON, the daytime stamp is printed with all
***CONNECTED TO
and
***DISCONNECTED
messages. When OFF, no daytime stamping of connects and disconnects occurs
See also: connect, daystr, daytime, disconne, mstamp