7. Function Settings
28
7. Function Settings
7.1 Changing Date and Time
DISPLAY
PROCEDURE
Press
and
keys simultaneously for 2 seconds or longer on
the Normal Measurement screen (Measurement Mode).
The set-up phase number that indicates what you are adjusting appears
at the bottom left, and the last 2 digits of the year flash. Use
and
keys to adjust the year. Then press
key.
* The set-up phase numbers correspond to the followings:
1 ………… Year
4 ………… Hour
2 ………… Month
5 ………… Minute
3 ………… Date
Next, the numeric value indicating month flashes.
Use
and
keys to adjust the month. Then press
key.
Next, the numeric value indicating date flashes.
Use
and
keys to adjust the date. Then press
key.
Next, the numeric value indicating hour flashes.
Use
and
keys to adjust the hour. Then press
key.
Next, the numeric value indicating minute flashes.
Use
and
keys to adjust the minute, and press
key. After pressing
key, the Normal Measurement screen
will be displayed and the setting is complete.
* If the
key is pressed before saving the setting, you will
return to the Normal Measurement screen without saving the setting.
m/s
Set-up Phase
