1.2 Operation Panel
When a key is pressed, you will hear a confirmation beep. You can turn the beep off in the function setting.
1. Part Names and Functions
3
Hold/Set Key:
Press this key to hold/release the displayed value of the measurement mode.
Also use this key to save the selected item in time/date setting mode and function setting mode.
Air Velocity
Pressure
Air Temp.
(Optional)
Samp. Key
Press this key briefly to store the displayed value. (All measurement parameters will be stored.)
The maximum number of memory is 100.
Hold key down to store the average value over the duration of time the key is held.
Sampling is done every 1 second and average value over up to 60 seconds can be
obtained. (Measurement values beyond 60 seconds will not be acknowledged.)
Power Switch
Turn ON/OFF the power
I
: ON
Ｏ
:OFF
Feed Key (6113 only)
Each time you press this key, the printing paper is
fed by 1 line.
Clear Key
-
When the stored data is displayed:
Press this key for one second or longer to delete
the last piece of data stored in the memory.
-
In the function setting mode:
Use this key to exit setting
-
While printing:
Use this key to stop printing.
(Note that you cannot stop printing the data that
has already been transmitted to the printer.)
▲
Key
Press this key in the measurement mode to select a time
constant from 1, 5, or 10 seconds for moving average
deviations.
▼
Key
Press this key to select the range of the bar graph
from 1, 5, 10, 25, or 50m/s when you are in the
measurement mode.
* You can also use
▲
and
▼
keys to select parameter or
to move numeric value up or down.
Print Key (6113 only)
Press this key in the measurement mode to print out the
displayed value. (All measurement parameters will be
printed out.)
In the calculation mode, the calculation results (Ave.,
Max. and Min.) of the data stored in the memory will be
printed out.
SP. Zero Key (Optional for 6113/6114)
To adjust the zero point, hold down this key for
over 2 seconds when the pressure value is
displayed in the measurement mode.
Mode Key:
Use this key to change the
measurement parameters in the
measurement mode and the
calculation mode.
Calc. Key:
Use this key to switch to the
calculation mode and change
the calculation items.
Measurement Mode
Avg. Value
Max. Value
Min. Value
Stored Data Display
<Calculation Mode>
