4. Saving and Deleting Measurement Data
16
4.2.3 Deleting Selected Data: Deleting Single Specified Stored Data
DISPLAY
PROCEDURE
<Stored Measurement Data Display>
Press
key 4 times on the Normal Measurement screen
(Measurement Mode) to display the Stored Measurement Data Display
in the Calculation Mode.
(For details on Calculation Mode, refer to “5. Measuring AVG, MAX
and MIN Value” in page 17.)
Press
key to select the number of the data you would like
to delete.
Press
key for 4 seconds or longer to delete the selected data.
(This procedure can be performed in any measurement mode of
measuring Air Velocity, Air Temperature, and Pressure.)
When you hear a beep sound, the data is deleted and the total amount
of the stored data is displayed. Then it will return to the screen showing
the stored measurement data.
To delete data successively, press
key to select the data
that you want to delete, and press
key for 4 seconds or longer
to delete it. You can delete only one data at a time.
After the selected page is deleted, the page number of the remaining
data will shift up. (See example below.)
Example:
There are four data. If the 3
rd
data is deleted, the 4
th
data will be shifted
up to the 3
rd
data, and the data from page 1 to page 3 will be remained.
Data1
Data2
Data 3
Data 4
Data 1
Data 2
Data 4
Data 1
Data 2
Data 3
The data number changes
m/s
m/s
Data Number
Total amount of stored
measurement data
m/s
