7. Battery Charge
72
7. Battery Charge
7.1 Charging Battery
When the AC adapter is connected, you can charge the battery (one or two) when it is installed in
the instrument.
When the battery is fully charged, the Power state LED becomes red.
When the battery is charging, the power state LED will blink.
Note: if the battery is charging now, you should not pull the battery out or insert another
battery.
It may damage the battery or the instrument.
If you must exchange the battery when the
power is on and the battery is charging, you can
follow this instruction:
First, tap the Power Icon (a) on the main
screen.
Tap [Enable Pull] (b), and then you can pull the
batteries out or insert them.
When you are finished, you must tap [RETURN]
(c) to finish it.
You may also charge the battery with the provide charger instead of using the
instrument and AC adapter:
Open the battery compartment cover on the rear of the instrument by hand.
Connect the battery to the provided charger to recharge the battery. It takes
about 4 hours to charge one battery fully.
After the battery is charged, install it into the instrument (Refer to
2.1 Power Supply
for installing the battery).
(a)
(b)
(c)
