3.Display Description and Operation Procedure
16
3.5 MODE
Tap [MODE] to display the mode selection window.
*User needs to have the authorization
(Change Measurement Mode) to
change measurement mode.
In
the
Mode
setting
screen
you
can
configure measurement settings in each
mode.
Select a mode from below and tap it;
“SINGLE”,“CONTINUOUS”,“INTERVAL”,
“STATS”,“STANDARD”,”PRESET”,
“REMOTE”.
You can set items such as INTERVAL,
SAMPLE T., CYCLES, MANUAL STOP, AUTO
SAVE, AUTO PRINT and START DELAY.
Please note that the setting items vary
depending on the measurement mode.
3.5.1 SINGLE
[Measurement Flow]
Perform a measurement once within the pre-set time frame.
Example: If the setting is as follows:
INTERVAL: N/A
SAMPLE T.: 00:00:15
CYCLES: N/A
A 15 second sampling is performed.
* Delay Time: Set Delay Time in START DELAY screen (Refer to
3.8.1
)
.
Sampling Time
(15sec)
Start
Measurement
Finish
Measurement
Wait Time
Pump ON
Delay Time
10 sec
Wait Time
*Note that the instrument is capable of 180 hours
of continuous operation in every measurement
mode.
