Kanguru KCLONE-14HD-SATA Скачать руководство пользователя

Страница: 37 / 44

8.21 Total Copy Count

TOTAL COPY COUNT keeps track of the total number of successful and unsuccessful duplications

produced by the system. This is a running count that includes all copy modes.

Tap

the ‘RUN’ button

to view the total copy count.

8.22 Update Firmware

The UPDATE FIRMWARE function allows you to upgrade your Kanguru Hard Drive Duplicator to

the latest firmware version.

Warning!

Do not attempt to update your duplicator’s firmware unless specifically instructed to do so

by a Kanguru Technician.

To update your firmware:

1. Contact Kanguru Technical Support at 508-376-4245 to receive a firmware update file.

2. Format a SATA hard drive as FAT32.

3. Copy the firmware file to the hard drive.

4. Connect the hard drive to the duplicator’s Source port.

5. From the ADVANCED SETUP menu,

tap

the ‘SET’ button to navigate to UPDATE FIRMWARE

and then

tap

the ‘RUN’ button.

6. Once the system has confirmed the firmware file, a message will be displayed on the screen

asking you to confirm the firmware update.

Tap

the ‘RUN’ button to proceed or

tap

the ‘SET’

button to cancel.

7. Wait for the firmware update process to complete.

8. Once the firmware update process has completed, reboot your system and the new firmware

version and build number will be displayed on the startup screen.

Warning!

Do not disconnect power or turn off the duplicator while updating the firmware. Doing so

may cause the duplicator to become non-functional.

Total Copy Count / Update Firmware

Содержание KCLONE-14HD-SATA












































Результаты поиска

Содержание KCLONE-14HD-SATA

Отзывы:

Похожие инструкции для KCLONE-14HD-SATA

Бренды по названию

Популярные бренды

Kanguru KCLONE-14HD-SATA, Руководство пользователя

Результаты поиска

Содержание KCLONE-14HD-SATA

Отзывы:

Похожие инструкции для KCLONE-14HD-SATA

Бренды по названию

Популярные бренды