Kanguru KCLONE-14HD-SATA Скачать руководство пользователя

Страница: 2 / 44

Notices and Information

Please be aware of the following points before using your KanguruClone

DOS®, Windows 95® , Windows 98®, Windows NT®, Windows 2000®, Windows ME®, Windows

XP®, Windows Vista®, Windows 7® and Windows 8® are registered trademarks of Microsoft Inc.

Apple® and Macintosh® are registered trademarks of Apple Computer Inc. IBM and OS/2 are

registered trademarks of the International Business Machines Corporation. All other brand or product

names are trademarks of their respective companies or organizations.

Kanguru Solutions will not be held responsible for any illegal use of this product nor any losses

incurred while using this product. The user himself is responsible for the copyright laws, and is fully

responsible for any illegal actions taken.

Customer Service

To obtain service or technical support for your system, please contact Kanguru Solutions Technical

Support Department at 508-376-4245, or visit www.Kanguru.com for web support.

Legal notice

In no event shall Kanguru Solutions’ liability exceed the price paid for the product from direct,

indirect, special, incidental, or consequential software, or its documentation. Kanguru Solutions

offers no refunds for its products. Kanguru Solutions makes no warranty or representation, expressed,

implied, or statutory, with respect to its products or the contents or use of this documentation and

all accompanying software, and specifically disclaims its quality, performance, merchantability, or

fitness for any particular purpose. Kanguru Solutions reserves the right to revise or update its products,

software, or documentation without obligation to notify any individual or entity.

Export Law Compliance

Regardless of any disclosure made to Kanguru Solutions pertaining to the ultimate destination of the

specific Kanguru product, you warrant that you will not export, directly or indirectly, any Kanguru

product without first obtaining the approval of Kanguru Solutions and the appropriate export license

from the Department of Commerce or other agency of the United States Government. Kanguru

Solutions has a wide range of products and each product family has different license requirements

relative to exports.

FCC Compliance Statements

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the Distance between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Notices and Information

Содержание KCLONE-14HD-SATA












































Результаты поиска

Содержание KCLONE-14HD-SATA

Отзывы:

Похожие инструкции для KCLONE-14HD-SATA

Бренды по названию

Популярные бренды

Kanguru KCLONE-14HD-SATA, Руководство пользователя

Результаты поиска

Содержание KCLONE-14HD-SATA

Отзывы:

Похожие инструкции для KCLONE-14HD-SATA

Бренды по названию

Популярные бренды