Cut and fit the windshield and side
windows. Install with canopy
adhesive. Tape securely in place and
allow to cure. Cut the side window
1/8-inch larger than the opening and
secure with canopy adhesive.
Mount the servo to the wing servo
door with the correct length extension
just as was done with the fuselage.
Install the ailerons on the wings using
the same process as was used with the
elevator and rudder. Install the servo
using the provided string the pull the
wire through. Drill a 1/8-inch hole in
the aileron 1/2-inch behind the hinge
line. Install the short control horns.
With the servo centered install and
adjust the push rod. Align the aileron
carefully.
Locate and open the holes for the wing
strut attach brackets as shown and
install the brackets.
1/2-inch
2-inches
7 3/4- inches
Install the wing tube in the fuselage,
slide the wings on and secure with the
supplied screws. Install the wing
struts to the fuselage with the screws
and lock nuts. Adjust the struts so
there is no free play but not so tight as
to twist or deform the wing.
1/2-inch
10