Kanga 5 Series Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 78

background image

Jaden Kanga Group

Jaden Kanga – OPERATORS MANUAL

Page

69

LIMITATION OF REMEDY AND DAMAGES

Kanga Loaders liability under this express warranty, and under any implied warranty that may exist, is
limited  to  repair  or  replacement  of  any  defective  part.  In  no  event  shall  Kanga  Loaders  be  liable  for
incidental, special, or consequential damages (including lost    profits).

DISCLAIMER OF FURTHER WARRANTY

Kanga  Loaders  makes  no  warranty  other  than  what  is  expressly  made  in  this  warranty.  If  the  law
provides  that  an  implied  warranty  of  merchantability,  or  an  implied  warranty  of  fitness  for  a  particular
purpose,  applies  to  Kanga  Loaders,  any  such        implied  warranty  is  limited  to  the  duration  of  this
express warranty.

SPARE PARTS WARRANTY: 6 MONTHS

TERMS AND CONDITIONS

KANGA  LOADERS  LTD  will  warrant  any  part  found  to  be  defective  within  the  conditions  of  normal
usage. Breakage or damage to any part caused by abuse or misuse will not be considered.  Hydraulic
hoses will not be covered by warranty if any signs of external damage are apparent.

Tyres, tubes and tracks are not covered by warranty.

The warranty period is for six (6) months from the delivery date and applies to only genuine spare parts.

This warranty does not cover any labour, freight, incidental or consequential charges.

The warranty claim will not be recognised without the return of the faulty part to Kanga Loaders Ltd and
must include the loader and attachment serial number.

A  warranty  claim  for  any  engine  part  is  covered  by  the  engine  manufactures  standard  warranty
contained in the engine manual handbook.

It is the owner’s responsibility to ensure that the correct hydraulic and engine oil levels are  maintained
and  that  maintenance  is  carried  out  as  required  in  the  manuals.  Claims  for  damage  as  a  result  of
insufficient oil levels will not be recognised.

«
...
67
68
69
70
71
...
»

Содержание 5 Series















































































Отзывы:

Нет отзывов

Похожие инструкции для 5 Series

Бренд: Bush Hog Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды