Kanga 5 Series, Руководство оператора

Страница: 21 / 78

Jaden Kanga Group
Jaden Kanga – OPERATORS MANUAL Page
21
The following safety requirements should be read in conjunction with the safety rules provided for the
base model, ie, Kanga Loader, Kanga Kid and the operating instructions. All tasks and risks
associated with the task are identified using the Job Safety and Environmental Analysis (JSEA) or Risk
Assessment (RA) and ALL risk controls are to be identified and implemented before the work
commencing.
LOG SPLITTER SAFETY RULES
Always…
o
Establish and maintain a minimum 4 metre (12 foot) exclusion zone
around the local working area and ensure no person enters this zone,
other than the operator, whilst the machine’s engine is running.
o
Use leather gloves to protect hands from wood splinters.
o
Clear split logs away from the base of the machine, to ensure they do not
interfere with the operation of the log splitter. When clearing away the split
logs, ensure that the machine is shut down and the pressure released
from the hydraulic controls.
Never…
o
Place any article or body part under the log splitter at any time.
o
Place any attachment, article or body part in the zone of travel of the log
splitter.
FORK LIFT TYNES SAFETY RULES
Always…
o
Establish and maintain a minimum 4 metre (12 foot) exclusion zone
around the local working area and ensure no person enters this zone,
other than the operator, whilst the machine’s engine is running.
o
Keep the general working area clear of bystanders and other workers.
Loader operations typically rely on rapid movement and direction changes.
It is important, therefore, that the whole operation area is kept clear of
other personnel and operators maintain vigilance about their immediate
surroundings.
Never…
o
Place any article or body part under the tynes at any time.
o
Carry passengers, either on the machine or on the tynes of the forklift.
o
Overload the machine or tynes.
o
Travel with the tynes raised, especially when carrying loads.
ANGLED BACK-FILL BLADE SAFETY RULES
Always…
o
Establish and maintain a minimum 4 metre (12 foot) exclusion zone
around the local working area and ensure no person enters the zone,
other than the operator, whilst the loader engine is running.
o
Keep the general working area clear of bystanders and other workers.
Loader operations typically rely on rapid movement and direction changes.
It is important, therefore, that the whole operation area is kept clear of
other personnel and operators maintain vigilance about their immediate
surroundings.
Never…
o
Place any article or body part under the angled back-fill blade at any time.