Kanga 5 Series, Руководство оператора

Страница: 10 / 78

Jaden Kanga Group
Page Jaden Kanga – OPERATORS MANUAL
10
safety
PREPARATION FOR USE
I N S P E C T I O N A F T E R D E L I V E R Y
When the machine is delivered it should be inspected for any evidence of damage caused as a result of
shipment before it is declared ready for use. The preparation of the mini loader for use should only be
undertaken by a responsible person who has read and understood this manual. The requirements are
simple and coupled with the use of good common sense, together with general occupational health and
safety knowledge and a visual inspection should not pose any problems. The following checklist
provides suggestions for detecting defective, damaged or improperly installed parts.
C H E C K B E F O R E U S E
1 Inspect the machine chassis for any visible damage.
2 Visually inspect all components to assure their security of attachment.
3 Inspect all areas for evidence of hydraulic oil, engine oil or fuel leakage.
4 Inspect boom arm assembly area for security of components and sufficient
lubrication. Check hydraulic cylinders for oil leakage and visible damage.
5 Check hydraulic oil lines for correct connection and for signs of leakage.
6 Check wheel and tyre assemblies for loose or missing wheel nuts, any visible
damage and proper tyre inflation
7 Check wheel drive motor assemblies for any visible damage and oil leakage.
8 Inspect all cylinders for rust, nicks, scratches or foreign material on shafts. Check
for hydraulic oil leaks at the seal and fitting areas.
9 Inspect the engine compartment for loose or missing components and any
evidence of damage or leakage.
10 Check the hydraulic fluid level is within operating limits as marked on the dip stick
12 Check the engine oil level is within operating limits as marked on the dip stick.