SW-VDYWA LL
21
l
Overlay Hierarchical Relationship Setting
Overlay Hierarchical setting in SW-VDYWALL is applied for PIP display mode. In the following picture
Figure 5-22
,
L1
(Level 1) is
the bottom layer, and
L4
(Level 4) is the top layer. The operation area is at the bottom of the main interface. The radio button
All
is
for setting on all channels and
Different
is for setting on a single channel.
Figure 5-22 Overlay Hierarchical Relationship Setting
l
Output Display On/Off
It is used to display/un-display the output image of one channel. Select the check boxes and press the button
Set
to confirm.
As shown in
Figure 5-23
.
Figure 5-23 Output Display On/Off
l
Communication Information
This area is to check the connecting status between the computer and SW-VDYWALL (showed in
Figure 5-24
), and choose a
proper connection way to check if it is well connected. The detailed information is showed on the right side of the picture.
Note
: If the adjusting image does not synchronize with the output images show on the displays, please press the button
.
Figure 5-24 Additional Function Setting
5.6 Advanced Function Settings
5.6.1 Display Mode Setting
This function is to switch display mode or to save the present display mode. Right-click in any area on the main interface (except the
menu area) or press
View
on the main bar, there will be four items about modes showed on the popup menu,
Figure 5-25
.
Figure 5-25 Popup Menu
Содержание SW-VDYWALL
Страница 1: ...SW VDYWALL 1 SW VDYWALL ...
