SW-VDYWA LL
5.5 Additional Function Settings
5.5.1 Settings in the Auxiliary Function Area
l
The First Auxiliary Function Area
In this area, users can set the contrast, the brightness, add or remove the border of the output images. As shown in
Figure 5-15
.
Figure 5-15 The First Auxiliary Function Area
Contrast
/
Brightness
Setting
: When you need to set the image contrast/brightness of a single channel or all channels, just select
the corresponding radio button and drag the slider on the slider bar to an appropriate position. And then press the button
Set
to
confirm. In this area, the button
Reset
is used to set the value of contrast/brightness to the factory default (Default value of image
contrast: 100, brightness: 512).
Border Setting
: When you need to set the border of the image of a single channel or all channels, just select the corresponding
check boxes. And press the button
Set
to confirm your operation. The button
OFF
/
ON
is used to off-set/set the border of the input
images of all channels.
Содержание SW-VDYWALL
Страница 1: ...SW VDYWALL 1 SW VDYWALL ...
