KanexPro SW-VDYWALL, Руководство пользователя

Страница: 14 / 31

SW-VDYWA LL
Detailed Operations: While the software is running normally, click on the button , the display mode area on the software
interface will show the output display mode of any one of the input channels. The three images on the displayers (The second, third
and fourth outputs) make up a whole image same to the input image. The first displayer shows a blue screen.
The buttons are used for choosing the image of any one input channel to the outputs.
5.4.3 Matrix Switching Function (Full Displaying)
Function: To choose one or all the input images of the four input channels and then output to the four output displays. Shown in
Figure 6-4 . The default correspondence between the four displayers is like.
Detailed Operations: While the software is running normally, click on the button , the display mode area on the software
interface will show the output display mode of any one of the input channels. The image of each displayer is the same with the
corresponding input image. And click on the button , the display mode area on the software interface will show the output
display mode of any one of the input channels. The output images are the same with each other and also the same with the input
image. Shown in Figure 6-5.
5.4.4 Picture in Picture (PIP) Displaying
Function: SW-VDYWALL is able to present all the input images of the four channels on a single screen. It means that while the
screen is showing the main video, any of the other three input images (Had been compressed) also can be showed on this screen.
That makes users be able to monitor other input images. In one word, it means to overlay the main video and the deputy images
together.
Detailed operations: While the software is running normally, click on the buttons , , , or , the
display mode area on the software interface will show the display effect of all the four input channels. The images (at most three are
complete) on any one displayer are made by the four input images.
The buttons are used for checking the output image of any one channel.
The display effects are showed in Figure 5-7 to 5-11 .
Button
From input 4 , top
layer.
From input 3 ,
second layer.
From input 2 ,
third layer.
From input 1 ,
bottom layer.