KANEXPRO
HDMX44-18G
20 |
P a g e
Figure 7- 2 Connect to LAN
Step1.
Connect the TCP/IP port of the Matrix Switcher to Ethernet port of PC with
twisted pair.
Step2.
Set the PC’s network segment to the same as the Matrix Switcher. Do please
remember the PC’s original network segment.
Step3.
Set the Matrix Switcher’s network segment to the same as the router.
Step4.
Set the PC’s network segment to the original one.
Step5.
Connect the Matrix Switcher and PC(s) to the router. In the same LAN, each
PC is able to control the Matrix Switcher asynchronously.
Then it is able to control the device via a TCP/IP communication software.
7.2 TCP/IP Communication Software Control
(Exampled by TCPUDP software)
1)
Connect a computer with TCPUDP software to the Matrix Switcher. Open the
TCPUDP software (or any other TCP/IP communication software) and create a
connection, enter the IP address and port of the Matrix Switcher (default IP:
192.168.0.178, port:8080):
