7
Rear of the Heat Roller Unit
A. Circuit Breaker
Protection device that stops current if there is a direct short or excessive heat
B. Power
Receptacle
Supplies power to the Heat Roller Unit
C. Printer Connecting Cable
The cable used to connect the Heat Roller Unit to the printer.
D. Power Rating Label
Identifies the correct power source for the Heat Roller Unit.
E.
Handle
Used to easily lift the Heat Roller Unit.
Unpacking the Heat Roller Unit
Follow these steps to unpack the Heat Roller Unit. Be sure to select a location that meets the
general requirements as stated above.
Caution
IMPORTANT!
The Heat Roller Unit must be placed on a level surface, in a
dust free environment next to the PR5300. It is essential to be able to access the
Heat Roller Unit from all sides for its installation. It is also recommended that
you have one or more persons to assist with unpacking the Heat Roller Unit.
1. Place the shipping carton on a firm level surface. While unpacking, inspect the carton to
ensure no damage occurred during shipping.
2. Remove the Heat Roller Unit and accessory box from the packing box.
A
B
C
D
E
Содержание TEAMNisca PR5302
Страница 2: ......