Kanematsu Corporation TEAMNisca PR5302, Руководство пользователя

Страница: 15 / 27

13
6. Once the laminate ribbon has been identified and correctly set, press and hold the
CLEAR button while also pressing the EXE button at the same time. This accesses the
heat adjustment sub-menu.
7. To ensure an adequate bond between the laminate and card, the heat and travel speed
settings need to be optimized. The default settings are 0 for travel speed and 0 for heat.
Some common problems can be fixed by changing the travel speed and/or laminator heat
settings. Press the EXE button to increment the value and the CLEAR button to
decrement the value.
8. Each laminator may need slightly different heat and travel speed settings for the same
ribbon. Print a test card and adjust settings using the above steps until lamination is
optimal.