Kamstrup MULTICAL 302, Инструкция по установке и эксплуатации, Страница: 3 / 16

3 Kamstrup A/S • 55121351_D2_GB_04.2015
MULTICAL® 302
Contents
1 General information 3
2 Temperature sensors 4
2.1 Mounting of temperature sensors 4
2.2 Coupling for direct sensor 4
3 Information codes "INFO" 5
4 Mounting of flow sensor 6
4.1 Wall mounting of MULTICAL® 302 7
4.2 Flow direction 8
4.3 Installation position 8
4.4 Humidity and condensation 8
5 Mounting of calculator 9
5.1 Compact mounting 9
5.2 Wall mounting 10
5.3 Position of calculator 10
6 Battery supply 10
7 Testing the function 11
8 Communication 11
8.1 Wired M-Bus communication 11
8.2 Wireless M-Bus communication
(radio) 11
9 Setup Mode 12
9.1 Changing the installation position 13
9.2 Changing the energy unit 14
1 General information
Please read this guide carefully before installing the energy meter.
In case of incorrect mounting, Kamstrup's guarantee obligations no longer apply.
Note that the following installation conditions must be obeyed:
- Pressure stage:
PN16/PN25, see marking. The flow sensor marking does not apply to
enclosed accessories.
- Pressure stage
sensor set type Ø 5.2:
PN16 and PN25
At medium temperatures above 90 °C, and below 15 °C, and the calculator should be wall-
mounted.