11
10
anti-scale cartridge can last up to 20
hours (or 3 months), depending on the
regularity of use and, depending on the
region, the hardness of the water being
used.
NOTE:
The anti-scale cartridge
is not washable and must be
replaced regularly to keep the
steam station operating at its
optimum level.
1.
The cartridge replacement
reminder light on both the steam
station and steam iron display will
switch on after 20 hours of steam
operation.
2.
The steam will automatically stop
once the cartridge replacement
reminder light turns on when
operating in High or Normal steam
modes.
3.
Replace the cartridge by following
the instructions found in the Care,
Cleaning & Storage section of this
book.
Use only the KSS062 Kambrook
anti-scale cartridge with this steam
station.
Self-clean Function
The steam station is also designed
with a self-clean function to keep
the iron clean and clear of scale
deposits or debris that can build up
in the soleplate and block steam
flow or even leave marks on fabric.
Self-clean is a quick process and it is
recommended after every 10 uses.
To operate self-clean, follow the
instructions in the Care, Cleaning &
Storage section of this book.
Using Your Steam Station
About Your Steam Station
continued...
Before First Use
Remove and safely discard any
promotional labels, stickers and
protective covers from the steam
station, soleplate and power plug.
IMPORTANT:
When
unpacking the steam
station, check to see you
have received all the
items listed in the Parts
List, including the reserve
anti-scale cartridge,
before discarding the
packaging.
Read the instructions on how to
assemble and use the steam station
before using.
For first use only, follow the below
steps.
1.
Ensure the anti-scale cartridge
is fitted in the steam station and
that there is enough water in the
water tank as per the Filling &
Emptying the Water Tank section
of this book.
2.
Place the steam station on a
stable surface with the iron locked
in the iron rest. Connect the
power cord to a 230V or 240V
power outlet and switch on. Press
the On/Off button and allow to
heat up for 2-3 minutes.
3.
Remove the iron from the iron
rest and switch to High steam, .
Allow the steam to release for 30
seconds while holding vertically
facing away from you. This will
remove any impurities, odours
and leftover moisture that might
remain on the product from the
manufacturing process.
4.
Test the iron on an old piece
of fabric to ensure that the
water tank and sole plate are
completely clean.
NOTE:
During initial use, vapour
may emit. This is due to the
initial heating of the materials.
The vapour will not harm the
performance of the steam iron
and is safe.
