9
8
Iron Controls & Indicators
1.
Steam control & self-clean
button
Press to toggle between High,
Normal or No Steam for dry
ironing. Press and hold for
6 seconds to activate the
self-clean function.
1a.
High steam
1b.
Normal steam
1c.
Steam off (dry iron)
The chosen function light
will illuminate to indicate
selection.
2.
Ready light
Flashes when iron is heating,
then remains illuminated when
the iron is ready for use.
3.
Anti-scale cartridge
replacement reminder light
Illuminates when it is time to
replace.
4.
Insufficient water light
Illuminates when the water tank
has insufficient water. Turns off
once tank is refilled.
1a
1
2
3
4
1b
1c
Your Kambrook Steam Station
continued...
About Your Steam Station
The Kambrook SwiftSteam Ultimate
Steam Station is easy to use and is
designed with great features often only
found in more expensive steam systems.
IdealTemp Technology
This steam station has been
specifically designed to heat to the
perfect temperature for ironing on most
ironable fabrics, from the toughest denims
to delicate silk, without having to adjust a
temperature or fabric selection dial.
NOTE:
Ironable fabric does not
include synthetic material such
as Lycra, HDPE, lyocell, cupro,
etc. Always test on a small,
discreet area on any fabric
before ironing.
Continuous Steam Ironing
This steam station is designed with
continuous steam when either of the two
steam modes is selected.
Steam can be halted by pressing the
steam control button until no steam is
selected.
NOTE:
Always turn the steam off
before sitting the iron in the iron
rest.
Select from either of the 2 steam settings,
Normal or High, to assist with removing
stubborn creases and wrinkles. High
steam is also suitable on most fabrics that
are hanging or in an upright position.
The steam station has fast heat-up, and
once ready, instant and continuous
steam, when selected.
Dry Ironing
Select the no steam setting when
storing, when the iron is in the iron rest
or for dry ironing. With the IdealTemp
technology, this is perfect for ironing
more delicate fabrics.
NOTE:
This steam station iron
must be used in accordance
to the specific garments care
instructions which are usually
found on a tag attached to the
garment.
3 Way Auto Shut-off
For added safety, the steam station
comes with 3 way auto shut-off. If the
iron is left 1) sitting in a horizontal position
(on its soleplate) without moving for 30
seconds, 2) is tipped and left resting on its
side for 30 seconds, or 3) if the iron is left
in a vertical position for 3 minutes (either
while resting in the iron rest or other), the
auto-off will activate.
If this occurs, 5 beeps will sound, the On/
Off button will start to flash continuously
and the light corresponding with the
function being used will also extinguish.
To resume ironing, press the On/Off
button, the steam control button or for
auto-off 1 & 2, simply move the iron.
Anti-scale Cartridge
To extend the life of the steam station
and help avoid lime scale build-up in the
iron which can affect performance, the
steam station comes pre-assembled with
a removable anti-scale cartridge plus
one reserve replacement cartridge.
The steam station will not operate
correctly if the anti-scale cartridge
is not correctly fitted as the water is
filtered through the anti-scale cartridge
before being released as steam via the
soleplate.
The anti-scale cartridge can last up to 20
hours (or 3 months), depending on the
regularity of use and, depending on the
hardness of water in the region of use.
