manualshive.com logo in svg
background image

4

Kambrook Recommends Safety First

IMPORTANT: Please retain your 

instruction book for future use.

At Kambrook, we believe that safe performance is the first priority in any 

consumer product, so that you, our valued customer can confidently 

use and trust our products. We ask that any electrical appliance that 

you use be operated in a sensible fashion with due care and attention 

placed on the following important operating instructions.

Important Safeguards For Your Kambrook  

X Blade Pro Food Prep System

•  Carefully read all instructions before 

operating the Kambrook X Blade Pro Food 

Prep System for the first time and save for 

future reference.

•  Remove and safely discard any packaging 

material and promotional labels before  

using the Stick Mixer for the first time.

•  To eliminate a choking hazard for young 

children, remove and safely discard the 

protective cover fitted to the power plug of 

this Stick Mixer.

•  Do not place the Stick Mixer near the edge 

of a bench or table during operation. Ensure 

the surface is level, clean and free of water, 

flour, etc.

•  Do not place the Stick Mixer on or near a 

hot gas or electric burner, or where it could 

touch a heated oven.

•  If using the Stick Mixer as a hand blender to 

blend hot food in a saucepan, firstly remove 

the saucepan from the heat source and 

ensure the power cord and body of Stick 

Mixer are also kept away from any heat 

source.

•  Take care when handling the Stick Mixer, 

attachments and sharp cutting blades, 

when emptying the bowl and during 

cleaning. Remember the blade and 

attachments are very sharp and should be 

kept out of reach of children.

•  Always make sure the Stick Mixer is 

completely and properly assembled  

before operating.

•  Ensure the Stick Mixer is turned OFF by 

releasing the ‘ON’ or ‘TURBO’ button on the 

Stick Mixer motor. Turn the power off at the 

power outlet and remove the power plug 

from the power outlet before attempting 

to attach or disassemble any of the 

accessories. 

•  Always ensure the Stick Mixer motor is 

securely fitted onto the food processing bowl 

lid, blending shaft or masher attachment  

before operating. 

•  Always ensure the food processing bowl lid 

is securely locked in place before operating 

the food processing bowl. 

•  Do not use attachments other than those 

provided with the Stick Mixer.

•  Do not attempt to operate the Stick Mixer by 

any method other than those described in 

this booklet.

•  Do not process hot or boiling liquids in the 

processing bowl – allow liquids to cool before 

placing into the processing bowl.

•  Do not operate the Stick Mixer continuously 

for more than 1 minute. Allow the motor to 

rest for 1 minute between each use.

•  Never mix dry, thick or heavy mixtures for 

more than 20 seconds. Stop the operation 

and stir the ingredients before continuing. 

Allow the motor to rest for 1 minute between 

each use.

Содержание KSB400













































Отзывы: