![background image](http://html1.mh-extra.com/html/kambrook/ksb400/ksb400_instruction-booklet_3382329029.webp)
28
Care, Cleaning and Storage
Stick Mixer Motor
To remove any food residue, wipe
the Stick Mixer motor and cord with a
damp cloth only. Do not use abrasive
cleaners or steel wool. Never immerse
the motor in water or any other liquid.
HINT:
See the Table on page 31
for a quick guide to washing each
part of the X Blade Pro Food Prep
System.
NOTE:
DO NOT place the masher
connector, processing bowl
lid and Stick Mixer motor into
a dishwasher. Wipe the Stick
Mixer motor with a damp cloth.
Wash the masher connector
and processing bowl lid in warm,
soapy water and dry thoroughly.
The detachable blending shaft,
processing bowl, blade holder,
cube cutter blade, cube cutter
disc, cube cutter shaft, cube
cutter cleaning tool, processing
blade, slicing/shredding disc,
chipping disc and masher
attachment are dishwasher safe.
WARNING:
All blades are
extremely sharp. Handle
with care.
Stick Mixer Attachments
Four Blade Blending Shaft
Before cleaning, turn the power off
at the power outlet and then remove
the power plug from the outlet.
Remove the Stick Mixer motor from
the stainless steel blending shaft.
The stainless steel blending shaft
can be placed in the dishwasher.
Alternatively, hand wash in warm
soapy water, rinse and dry
thoroughly after each use.
Do not use abrasive cleaners or
steel wool.
QUICK WASH: Between each
processing task, with the Stick Mixer
motor attached and turned on at the
power outlet, place the stainless steel
blending shaft and blade assembly
into a jug of water and press the ‘ON’
button for 5 seconds.
This will remove any foodstuffs on
the blade and shaft and allows you
to quickly continue onto the next
processing task.
Masher Attachment
Before cleaning the mashing
attachment, turn the power off at the
power outlet and remove the power
plug from the outlet.
Remove the Stick Mixer motor from
the mashing attachment by pressing
the ‘Release’ buttons.
The mashing attachment and
mashing attachment connector can
be hand washed in warm soapy
water, rinsed and dried thoroughly
after each use. Only the masher
attachment is dishwasher safe. Do
not put the masher attachment
connector in the dishwasher.
The mashing blade can be removed
for cleaning by holding the shaft
firmly and unscrewing the cap in a
clockwise direction. After cleaning,
dry thoroughly and replace the
blade and cap. Tighten the cap in
an anti-clockwise direction (See Fig.
19). Make sure the cap and blade are
reassembled before storing.
Содержание KSB400
Страница 2: ...X Blade Pro Food Prep System KSB400 Instruction Booklet...
Страница 34: ...33 Recipes...
Страница 44: ...43 Notes...