13
TKG SVC 1000
ACCESSORIES DISASSEMBLY
•
Remove the hose from the suction mouth by pulling it.
•
Release the by-pass adaptor on motor bonnet by turning the jack of by-pass
adapter counterclockwise (left) .
•
Remove the thin water hose on the shampoo tank.
Release the tip end of the thin water hose from the junction in the elbow by turning it
counter clockwise (left).
•
If you used the upholstery shampoo nozzle, release the jack of the by-pass adapter
in the hose handle with water spraying trigger by turning it counter clockwise (left).
•
Remove the thin water hose from the channels by pulling.
•
Pull the extension tubes and accessories to release them.
ASSEMBLING FOR WET VACUUMING FUNCTION
•
Unlock the locking latches by pulling outwards.
•
Put the motor bonnet away by holding it using the carrying handle.
•
Empty your tank if it is filled with water.
Do not put water into your tank for the wet vacuuming function.
•
Take the motor filter exhaust out of the tank.
Do not use the inner bonnet and water filter exhaust for wet vacuuming function.
•
Put the motor bonnet back on the tank and lock the latches.
•
Insert the hose by pushing it into the suction mouth.
•
After connecting the tubes to each other and to the spray trigger, attach the
desired accessory for your wet vacuuming area.
Instead of using two extension tubes, you can use your unit with only one tube or
without any extension tubes by connecting the carpet shampoo nozzle directly to
the elbow tube with spray trigger.
•
Plug the cord into the power socket.
•
Operate your machine using ON-OFF switch.
Turn off the pump while using the switch for the wet vacuuming function.
•
Move forward and backward to vacuum wet surfaces and do not dip all of the
accessory into water not to block air circulation.
