11
TKG SVC 1000
ASSEMBLING FOR THE CARPET SHAMPOO FUNCTION
•
Unlock the locking latches by pulling outwards as shown in the figure.
•
Put the motor bonnet away by lifting it by the carrying handle.
•
Empty your tank if it is filled with water.
Note
: Do not put water into your tank for the shampoo function.
•
Remove the water filter exhaust, otherwise it can cause foaming.
•
Put the inner bonnet on the tank.
•
Put the motor bonnet back on the tank and lock the latches.
•
Fill the shampoo tank with 5-6 liters of water and add 3-4 scales of shampoo (non-
foaming).
•
Insert the pin of the shampoo drawing pipe (B) to its connection place on machine
(A) by simply pressing.
•
Press the thin water hose (D) into the by-pass adaptor (C) in clockwise direction.
ASSEMBLING FOR THE CARPET SHAMPOO FUNCTION
•
Insert the elbow tube with the spray
trigger into the extension tubes by
pressing in, and connect the
extension tubes to each other.
•
Attach the carpet shampoo nozzle
to the extension tubes.
Instead of using two extension tubes,
you can use your machine with only
one tube or without any extension
tube by connecting the carpet
shampoo nozzle directly to the
elbow tube with spray trigger.
•
Insert the thin water hose into the
channels.
Note
: The channels on the extension
tubes should be aligned.
•
Insert the tip end of the thin water
hose (B) into the junction (A) on the
elbow tube, locking in clockwise
direction.
