INSTALLATION INSTRUCTIONS
Bidet Faucet
1260871-2-B
3 of 8
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
1. SPRAY ASSEMBLY INSTALLATION
Brass Washer
Apply plumbers putty.
Nut
Washer
Escutcheon
Metal Washer
Rubber Washer
Bidet
Shank
Flange
Sprayhead
Nut
Install the Sprayhead
Remove the sprayhead and fl ange.
Thread the nut, metal washer, and rubber washer to the bottom of the shank.
Apply a ring of plumbers putty or other sealant according to the putty manufacturer’s instructions.
From the underside of the bidet, insert the shank through the spray hole.
From the top of the bidet, thread the fl ange onto the shank.
Securely thread the sprayhead as far as it will go on to the shank.
Thread the fl ange until it is snug against the sprayhead.
Securely tighten the nut onto the shank with a wrench. Do not overtighten.
Remove any excess putty or sealant.
Install the Lift Rod Escuthceon
Apply a bead of plumbers putty or other sealant to the underside of the escutcheon according to the putty
manufacturer’s instructions.
Insert the escutcheon through the mounting hole from above.
From the underside of the bidet, slide the washer (tapered side up), brass washer, and nut onto the
escutcheon shank.
Securely tighten the nut with a wrench. Do not overtighten.
Remove any excess putty or sealant.
