INSTALLATION INSTRUCTIONS
Bidet Faucet
1260871-2-B
5 of 8
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
3. HANDLE AND BREAKER INSTALLATION
Washer
Seal
Gasket
Transfer
Valve
Sealing
Washer
Apply thread
sealant.
Hose
Pipe
Fitting
Compression
Sleeve
Nut
Adapter
Ensure that the seal gasket or O-ring is installed to the underside of the cold handle assembly.
Fit the valve assembly through the top of the lavatory. (Cold on the right side, hot on the left side.)
Partially thread the screws into the ring.
Install the washer and ring onto the valve assembly. Thread the ring up the valve assembly.
Orient the handle with the faucet.
Tighten the screws. Do not overtighten. Repeat with the second handle.
Valve/Breaker Installation
Slide the nut and compression sleeve onto the adapter.
Apply thread sealant onto the bottom threads of the adapter. Thread the adapter onto the bottom of the
transfer valve shank. Securely tighten the nut.
Apply thread sealant onto the short end threads of the pipe fi tting. Thread the pipe fi tting onto the side of
the transfer valve shank.
Apply thread sealant onto the long end threads of the pipe fi tting. Thread the fl exible hose onto the pipe
fi tting.
Slide the sealing washer (tapered side up) onto the transfer valve.
From the underside of the bidet, insert the transfer valve into the mounting hole.
From the front of the bidet, rotate the transfer valve until the pipe fi tting faces toward the right.
From the top of the bidet, slide a sealing washer (tapered side down), fl at washer, and plastic nut onto the
transfer valve. Securely hand tighten the plastic nut.
From the front of the bidet, rotate the valve stem counterclockwise. Slide the spline insert onto the valve
stem.
Thread the escutcheon onto the plastic nut.
Rotate the handle until the pointer faces the front of the bidet. Press the handle onto the spline insert.
