INSTALLATION INSTRUCTIONS
Shower Arms
1193441-2-A
3 of 3
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
INSTALL THE SHOWER ARM
Shower Ell (Wall)
Escutcheon (Not Provided)
Shower Arm
Showerhead
(Not Provided)
Apply thread
sealant tape.
Shower Ell
(Ceiling)
Escutcheon
(Not Provided)
Shower Arm
CAUTION: Risk of product damage. To avoid plugging the showerhead spray outlets, use thread sealant tape
on the shower arm threads. Do not use thread sealant compound (pipe dope).
NOTE: The showerhead and escutcheon are not provided.
Remove the temporary nipple from the shower ell.
Slide the escutcheon onto the end of the shower arm that will be closest to the wall/ceiling.
Apply thread sealant tape to the shower arm threads closest to the wall/ceiling.
Thread the showerarm into the shower ell.
Carefully tighten the shower arm with a clean strap wrench.
With the showerhead off, turn on the water to fl ush out the system.
Check connections for leaks. Repair as needed.
Turn off the water.
Install the showerhead according to the showerhead manufacturer’s instructions.
