background image

   

                                                                         

1332564-2A-B            

                                                                                                                                        1   

  

INSTALLATION INSTRUCTIONS

PARALLEL

Turn diverter handle clockwise for bath spout, turn counter-clockwise for handshower, middle position for both.

Press the buttons of the handshower to change the water flow. 

ROUGH-IN DIMENSIONS

HANDLE OPERATION 

All information is based on the latest product information available at the time of publication. Kohler Co. reserves 

the right to make changes in product characteristics, packaging, or availability at any time without notice. 

Please leave these instructions for the consumer. They contain important information.

NOTES:

1. Shut off the main water supply.

2. Carefully read entire instructions before beginning installation.

3. Observe local plumbing codes.

4. This faucet has switching function only. It must work with a bath faucet (purchased separately) that has both 

on/off and hot/cold mixing control.

5. The highest working pressure for handshower is 0.5MPa(5bar). If it exceeds 0.5MPa(5bar), a pressure reducer 

is needed. The highest water and environment temperature is 60ºC. Please keep handshower, showerhead and 

shower arm away from heater, or it may become damaged and cause injury to the user.

BEFORE YOU BEGIN

22572T-9    

Deck Mount Diverter And Handshower

22

182

43

240

208

Ø28

45º

Ø28

60×60

60×60

2000

1000

1000

600

200 Min.

50 

Max.

Ø30~Ø35

Ø33~Ø40

G1/2˝

G1/2˝

G1/2˝

G1/2˝

G1/2˝

Summary of Contents for 22572T-9

Page 1: ...tion NOTES 1 Shut off the main water supply 2 Carefully read entire instructions before beginning installation 3 Observe local plumbing codes 4 This faucet has switching function only It must work with a bath faucet purchased separately that has both on off and hot cold mixing control 5 The highest working pressure for handshower is 0 5MPa 5bar If it exceeds 0 5MPa 5bar a pressure reducer is neede...

Page 2: ...ition the handle base 4 as shown Tighten the screw 2 by hex wrench 1 How to Install the Handshower Pre install the screws 19 into the screw holes of the threaded ring 20 Install the threaded ring steel washer 18 and fiber washer 17 on the shank 16 From underside of the bathtub install the shank into the mounting hole as shown Put the O ring 15 into the groove of the escutcheon 14 Tighten the escut...

Page 3: ...erter Connect one end of the hose 29 length 600mm to the shower hose 26 length 2000mm Connect the other end to the shower end the end with check valve 13 of the diverter Connect one end of the hose 27 length 1000mm to the bath spout Connect the other end to another end of diverter 27 28 13 29 26 897637 836316 75100 58 1332549 22352 1110332 831587 3029882 834428 1297467 77420 1030624 1240266 880010...

Page 4: ...en washer Way 2 work with dual handle deck mount bath faucet Put the washer 30 into the nut 32 of the tee 31 Then connect the tee 31 to one side body 33 of the deck mount bath faucet Put the fiber washer 34 into the nut 35 Tighten the nut to one of the ports of the center tee 36 for the spout Connect one side body 37 and tee 31 on another side body with hose 28 length 1000mm Connect the tee 31 and...

Reviews: