Kallipr Captis Pulse Lite 1.0, Руководство пользователя

Страница: 5 / 7

Captis Cloud Configuration Guide Page | 4
3.2 Crimp the pins
The following steps outline how to securely crimp the amphenol pin to the cable
conductor. Please note,
only the crimping tool listed below is recommended for
crimping these pins. Failure to use the recommended tool may result in non-
compliant installations.
Table 4
3.2.1 Step 1
Insert the crimp contact into the opening of the crimp tool, with the crimp opening
facing the top of the tool.
3.2.2 Step 2
Insert the stripped cable into the crimp barrel.
Ensure that the cable conductor is in contact with the crimp tabs associated with
dimension B, and the cable insulation is in contact with crimp tabs associated with
dimension D, as seen in Figure 1 below:
Figure 1
3.2.3 Step 3
Squeeze the handle of the crimping tool together firmly until the tool releases.
3.2.4 Step 4
Visually inspect the crimp for proper termination. A light tug on each termination will
ensure the crimp is mechanically adequate.
TOOL
MANUFACTURER PART
NUMBER
Amphenol Crimping
tool
5A 20-22AWG
ASST-C-05-W-A